Space Engineers

Space Engineers

Ei tarpeeksi arvosteluja
SG Mobile Rotary Miner
   
Palkinto
Lisää suosikkeihin
Lisätty suosikkeihin
Poista suosikeista
Type: Blueprint
Tiedostokoko
Julkaistu
Päivitetty
1.152 MB
14.12.2019 klo 2.20
15.12.2019 klo 16.54
3 muutosilmoitusta ( näytä )
Tarvitset lisäosan käyttääksesi tätä esinettä.

Tilaa ladataksesi
SG Mobile Rotary Miner

Kuvaus
Small Grid Mobile Rotary Miner. Digs and hauls about 3.5 million KG of ice (with 10x inventory, don't know what it holds with lower settings). 8 large cargo containers, 2 medium cargo containers, 8 drills. Made to fire up and be left to run on its own, takes about 10 minutes to fill itself up. Can drill about 40 meters deep, I estimate.

I have moved the ejectors to the landing legs.
Added merge blocks to the drill assembly so it can be locked during flight.
Increased forward and reverse thrust.
Reduced excess landing leg height.
Wrote toolbar button explanations into the cockpit LCDs.
2 kommenttia
lair1134  [tekijä] 3.12.2020 klo 22.55 
Been a while since I checked this, sorry man. For the most part, all the controls are set up to be sequential, based on first to last from left to right, on each toolbar. Basically, you extend the legs to land, of course, then unlock the merges, start the drills, start the rotor, and then (always verify that the pistons are set to the right speed) reverse the pistons. Once the descent is complete, you can either manually control the pistons retraction speed, or you can use the decrease/increase velocity controls to retract the drill pistons. Once the pistons are all the way up, turn the drills, and slow the rotor down to a stop when the merges are lined up, then merge, unlock landing gear, and fly home.
Pancake 24.4.2020 klo 5.17 
how dose it work? Your explanation is not help. In what order should I start this thing?