Kauppasivu
Stormworks: Build and Rescue
Kaikki Keskustelut Kuvakaappaukset Taideteokset Suoratoistot Videot Workshop Uutiset Oppaat Arvostelut

Stormworks: Build and Rescue

Kauppasivu
Stormworks: Build and Rescue >  Workshop > Käyttäjän WALL-E Workshop
Ei tarpeeksi arvosteluja
6 Speed Smooth Automatic Transmission
Kuvaus Keskustelut0 Kommentit15 Muutokset
   
Palkinto
Lisää suosikkeihin
Lisätty suosikkeihin
Poista suosikeista
Vehicles: Vehicle, Technical, Creative, Land, Mechanical, Subassembly, Advanced
Tunnisteet: v0.9.19
Tiedostokoko
Julkaistu
Päivitetty
30.865 KB
12.11.2019 klo 16.05
17.12.2019 klo 10.43
5 muutosilmoitusta ( näytä )
Tekijä
WALL-E
Kirjautunut ulos
Näytä kaikki 26 kokoelmaa
1,248 Uniikkeja kävijöitä
577 Nykyiset tilaajat
21 Nykyiset suosikit

Tilaa ladataksesi
6 Speed Smooth Automatic Transmission

Kuvaus
6 Speed Automatic/Semi-Auto Transmission with an Automatic Clutch.

It has Reverse, Neutral and Gears 1-6. You can only access Neutral and Reverse when Semi-Automatic mode is enabled.

You can change the Shift Up/Down RPS on the Microcontroller by using the property numbers.
Green pipe is input power.
Red pipe is output power.

Please credit me if using in a creation.
15 kommenttia
< >
Jayed 19.10.2023 klo 18.15 
Does the read go to the engine and green for when wheels?
bluepeanut; Happy In Design 13.7.2020 klo 2.55 
Thank you WALLE, I was having some difficulties creating an auto box for a 37m tug boat so i needed a good auto gear module. I have dropped 4 of your auto boxes into the boat, to power 2 huge propellers and i'm happy with the results so far. Now i need to work on:
1) at about 35 RPS, the speed tops out at 11 and i would like 14 - 15
2) The auto shifts up through gears 1-5 very quickly and i'd like to hold onto 3 & 4 a little longer
3) I almost have to cut the RPS to get the gears to shift down

Any suggestion?
turbhoe 11.6.2020 klo 22.22 
My gears are inverted, 6th is the most torque and least speed but 1st is the highest speed and leas torque.
Shaquille Oatmeal 10.5.2020 klo 4.55 
the transmission is a little bit bulky and big. Might you be able to make a smaller version?
AB01 19.4.2020 klo 6.13 
Hi, I put your transmission in my truck. Thanks alot!
Jatojay 15.2.2020 klo 0.05 
suffering a drastic loss of power in 6th gear
WALL-E  [tekijä] 20.1.2020 klo 13.45 
AirplaneLover620 Your wheels are probably on the wrong way around. Look at the + and - arrows on the wheel rims and make it so + is the clockwise arrow.
wxairy 20.1.2020 klo 9.31 
When i test my vehicle, when it is in the forward gear, ti goes in reverse. how do i fix that?
BasicFrog 17.1.2020 klo 10.31 
i might also modify it
BasicFrog 17.1.2020 klo 9.32 
can i use this in one of my vehicles?