Butikssida
Stationeers
Alla Diskussioner Skärmbilder Konst Sändningar Filmer Workshop Nyheter Guider Recensioner

Stationeers

Butikssida
Stationeers >  Workshop > 123s workshop
34 betyg
[F&S] Room Temperature Control
Beskrivning Diskussioner0 Kommentarer18 Ändringar
   
Utmärkelse
Favorit
Favoritmarkerad
Avfavoritmarkerad
IC Code
Filstorlek
Lades upp
Uppdaterades
18.675 KB
25 mar, 2019 @ 6:11
14 apr, 2023 @ 19:39
14 ändringsnotiser ( visa )
Skapat av
123
Offline
Se alla 59 samlingar skapade av 123 och andra personer
3,184 Unika besökare
1,015 Nuvarande abonnemang
59 Nuvarande favoriter

Abonnera för att ladda ner
[F&S] Room Temperature Control

I 1 samling av 123
[F&S] Advanced Devices
14 artiklar
Beskrivning
Description
Allows you to control the temperature in the room within the specified limits.
This scheme works fine in small rooms and use hysteresis method to prevent unwanted rapid switching.

Requirements
  1. 1 IC Housing.
  2. 1 Integrated Circuit (IC10).
  3. 1 Gas Sensor.
  4. 1 Dial. (Optional not required) The dial works in the range of 0C - 45C
  5. At least one Cooler. (Connected pipes must be under pressure (CO2 are best choise) and have radiators in the external environment) (Support Gas/Liquid coolers)
  6. At least one Heater.

IC ports description
Port
Device
D0
Gas Sensor
D1
Dial. (Optional not required. If not mounted then the standard temperature will be 21C)
D2
Alert. (Optional not required. Turns on the specified device. You can use any device that supports On/Off)

Changeable values in IC code
define DesiredTemp 21 # temp in celsius define HysteresisWindow 2 # temp difference +-2 define CheckVolatiles 1 # 1=yes,0=no define VolatilesRatio 0.0003 # 0.03% on tablet

Chip states
State
Description
0
All fine
1
Low pressure (If pressure less 7 kPa IC Chip will not turn on temperature control and will sends a signal to port D2)
2
Detected more then 0.03% of volatiles in atmosphere, automatically shuts off heaters (coolers will still work) and sends a signal to port D2.
3
Temperature too high (if the temperature is set to 21, and the gas sensor shows 31, sends a signal to port D2)
4
Temperature too low (if the temperature is set to 21, and the gas sensor shows 11, sends a signal to port D2)

Important
It is strongly recommended not to disable or change the volatiles checker.
Insulated pipes must be laid in the room so as not to receive heat leakage.
For best results don't place gas sensor near cooler/heater.

Game version support
0.2.3920.18842 06/04/2023
18 kommentarer
< >
Immortalmargrave 17 nov, 2024 @ 5:32 
will this work on Europa? I've had all gases except oxygen and nitrogen freeze solid. Hell I've got a Mining Backpack full of Pure-Ice Pollutants, and Pure-Ice Carbon Dioxide just from my Solid/gas generators and Arc Furnace
123  [skapare] 4 sep, 2024 @ 3:42 
theoshuff,

maybe, but the wall cooler may not work properly due to multiple game updates and phase change.

At this point, I don't know of a simple way to thermoregulate the temperature at the base without complex systems.

https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=3324303636

In this case, an electrolyzer is used, but there I use black magic and take energy from subspace :)
theoshuff 5 aug, 2024 @ 12:23 
Does this still work?
123  [skapare] 14 apr, 2023 @ 19:44 
Fixed, now support 0.2.3920.18842 06/04/2023
123  [skapare] 3 jun, 2022 @ 21:43 
0.2.3299.16422 broken.
123  [skapare] 18 maj, 2022 @ 12:19 
Fixed
Wsufyrjd 21 dec, 2021 @ 9:20 
What line of your code contains the control of the "volatiles in the atmosphere"?
And is it possible to change this so that he reacts to their absence?
Gariot 29 mar, 2021 @ 2:30 
You could use the "sb" function to remove the batch writers. Saves some ressources and you can optimize the code! :)
Nerubix 28 jul, 2020 @ 16:05 
If you remove the contents of line 14, it will work. It's getting stuck in a loop where it's constantly powering everything on.
123  [skapare] 7 jul, 2019 @ 13:03 
Fixed