Butiksside
Space Engineers
Alt Diskussioner Skærmbilleder Illustrationer Broadcasts Videoer Værksted Nyheder Guider Anmeldelser

Space Engineers

Butiksside
Space Engineers >  Værksted > Luvstruckmangos værksted
Ikke nok vurderinger
IEC M.U.T Mech
Beskrivelse Diskussioner0 Kommentarer7 Ændringsbemærkninger
   
Pris
Føj til foretrukne
Gjort til foretrukken
Fjern som foretrukken
Type: Blueprint
Filstørrelse:
Offentliggjort:
1.668 MB
21. nov. 2018 kl. 1:57
1 ændringsbemærkning ( vis )
Designet af:
Luvstruckmango
Offline
Se alle 54 samlinger skabt af Luvstruckmango og andre folk (nogle kan være skjult)
1,096 Unikke besøgende
573 Nuværende abonnenter
17 Nuværende foretrukne

Abonner for at downloade
IEC M.U.T Mech

I 1 samling af Luvstruckmango
Interplanetary Enforcement Corps
272 genstande
Beskrivelse
The IEC Multipurpose, Utility, Tetherless, Mech was built to help IEC engineers with construction tasks. With a fully connected conveyor system through the arms, the M.U.T is capable of completing tasks without a need for the pilot to leave the vehicle. With a drill and a welder arm, the M.U.T extends the construction and ore gathering capabilities of the engineer.

General Info:
============
PCU: 4193
Approximately 12x larger than an engineer

46518.00 kg

Survival Capable
7 kommentarer
< >
Sparks2271 5. sep. 2019 kl. 12:29 
looks like an imperial dreadnought from 40k
[℘] Sarven 1. jan. 2019 kl. 19:07 
Totally not a SCV or anything..
Luvstruckmango  [ophavsmand] 24. nov. 2018 kl. 20:43 
@PVT Oz, You could set it up so the gyro's are on a group and disable them. Then you could enable them as needed.
Ozzy 24. nov. 2018 kl. 19:10 
I've done a basic test on making the arm moveable and for the most part it works just need to find a way to make only the arms move and not the hole body too. due to the gyro's
Luvstruckmango  [ophavsmand] 24. nov. 2018 kl. 16:58 
@PVT Oz, sounds like a good idea. I didn't do that simply because the complexity of keeping the arms connected to the conveyor system so the connector on the back can be used. But it sounds like a good idea
Ozzy 24. nov. 2018 kl. 14:46 
Really nice design and yes i know you got it from starcraft the SCV's, anyway im working on making the arms work with the MART script and wanted to get your thoughts on this.
Korvatus Klok 22. nov. 2018 kl. 22:36 
Looks epic already.