Abonner for at downloade
Maraq-L5

Fully equipped 5 floor base with elevator.

Switches:

Red: power
Green: lights
Yellow: utility devices
Blue: elevator
Black: activating levels
Darker blue: deactivating levels

Using the elevator (don't forget to remove the jack tool beneath it):

You can choose the level you want to go to by using a terminal:

* step 1: activate one of the 'AA SB Level ... On' switch boards.
* step 2: lock the corresponding rotating joint ('AA R-joint Level ...')

Start the elevator by activating the 'A SB Elevator' switch board. To go down again just deactivate.

It is advisable to reset the elevator after use by following this procedure:

* step 1: unlock the locked rotating joint.
* step 2: deactivate the 'AA SB Level ... On' switch board you used.
* step 3: activate the corresponding 'AA SB Level ... Off' switch board.
* step 4: deactivate that same switch board.

Now the elevator is ready for the next use.

Sadly you always have to start from level 0. E.g. when you want to go from the third to the first floor, you have to go to the ground floor and reset the elevator before being able to choose first floor.

Terminal x12
Uranium Generator
Flat Solar Panel x50
Compact Container x2
Large Container x2 (interconnected)
Medium Refinery x6
Medium 3D Printer x5
Large Greenhouse x3
Medium FAD Machine x3
Medium Medbay x2
Medium Armory
Stasis Chamber
Replicator
Solar Beacon
Mining Rig x6

If you want to build a base of your own with the elevator used in this one, you can find it here: https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1543624833.

A one level elevator (15 meter high) can be found here: https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1562922737.