Cities: Skylines

Cities: Skylines

113 hodnocení
Barrage 水坝
   
Ocenit
Přidat do oblíbených
Oblíbeno
Odebrat z oblíbených
Assets: Road
Velikost souboru
Přidáno
17.240 MB
7. čvn. 2018 v 8.46
Poznámky ke změnám (1) – zobrazit

Klikněte na „Odebírat“ pro stažení položky
Barrage 水坝

V 1 kolekci od uživatele hikke
All my works--我的所有作品
114 položek
Popis
大家好

这次的作品是直线型水坝,由三个部分组成,我会在下面说明


几个注意事项说明一下:

1.这个水坝是基于道路编辑器制作,可以像拉道路一样铺设,使用的是二车道游戏自带道路

2.铺设必须使用桥梁模式,其他无效

3.最大高度差请控制在55米左右,太高下面会悬空,太低模型会被埋在地形里

4.这个水坝只能拉直线,不能拉曲线

5.右面的二个必须物品必须要订阅,因为我是分三段制作

最后请大家多多点赞支持~

--------------------------------------------------------------------------------------------

hi everyone~~

This work is a dam and it consists of three parts. I will explain below.

tips:

1.This dam is based on a road editor and uses a two-lane road

2.Bridge mode must be used, other invalid

3.Maximum height difference please control about 55 meters

4.Can only be built in a straight line, not curve

5.The two necessary items on the right must be subscribed because I made it in three sections.

if you like please rate~~
Počet komentářů: 27
MOREOPTIONS 22. led. 2023 v 1.55 
After some careful editing, will have the sluice gates open and permitting water to flow over! Why did you make the dam components so short? It is working well in creating a good reservoir on my map! But had to modify so it is taller and having run off from my sluice gates! Will work on hydroelectric modification!
布摇沙窝 9. zář. 2021 v 20.51 
为什么我找不到啊?用find it也找不到,明明订全了 @hikke
金钟_Admiralty 5. srp. 2021 v 3.55 
不是很用得到
Hecravi 29. led. 2021 v 9.23 
溢洪道不用开,上下游各放一个水源就行,用着确实不错,加油
holypapa 19. dub. 2020 v 22.09 
外观写实,就是不流水,细看闸门封死的,教教我怎么开?
raybap 7. dub. 2020 v 13.26 
@Future, it does not generate power, it is only for visual effect.
Future 3. dub. 2020 v 16.18 
How much power can it make?
Leon_Skywalker 11. čvn. 2019 v 4.40 
支持
山火如狼 28. dub. 2019 v 18.16 
好看不中用 所以差评
山火如狼 28. dub. 2019 v 18.00 
你这个溢洪道是关闭的 不放水啊 截流了!