What does app's state 0x202 after update really mean?

모든 토론 > 도구와 서버 > Source 전용 서버(Linux) > 제목 정보

jka 2022년 7월 30일 오전 10시 31분

Running SteamCMD in a Docker container from image cm2network/steamcmd:root causes a 0x202 error on one of my machines but not the other one.

The used SteamCMD command is as follows:

/home/steam/steamcmd/steamcmd.sh +force_install_dir /home/steam/rust-server +login anonymous +app_update 258550 +quit

The error:

Connecting anonymously to Steam Public...OK Waiting for client config...OK Waiting for user info...OK Update state (0x3) reconfiguring, progress: 0.00 (0 / 0) Update state (0x3) reconfiguring, progress: 0.00 (0 / 0) Error! App '258550' state is 0x202 after update job.

Note: This only happens on one of my machines. On the other one everything works perfectly fine. This is despite the fact that in both cases SteamCMD is run in a Docker container made from the same image.

Since 0x202 could be a disk space error, below are my disk spaces. Both should have plenty for the app in question (Rust).

The machine on which the issue happens:

$ df -h Filesystem Size Used Avail Use% Mounted on dev 7,8G 0 7,8G 0% /dev run 7,8G 1,7M 7,8G 1% /run /dev/nvme0n1p5 20G 15G 3,7G 81% / tmpfs 7,8G 51M 7,8G 1% /dev/shm tmpfs 7,8G 5,9M 7,8G 1% /tmp /dev/nvme0n1p8 93G 3,4G 85G 4% /home /dev/nvme0n1p6 511M 292K 511M 1% /boot/efi tmpfs 1,6G 80K 1,6G 1% /run/user/1000

The machine on which the issue does not happen:

$ df -h Filesystem Size Used Avail Use% Mounted on dev 3,8G 0 3,8G 0% /dev run 3,8G 1,5M 3,8G 1% /run /dev/sda2 225G 18G 196G 9% / tmpfs 3,8G 0 3,8G 0% /dev/shm tmpfs 3,8G 4,0K 3,8G 1% /tmp /dev/sda1 300M 288K 300M 1% /boot/efi tmpfs 768M 68K 768M 1% /run/user/1000

The filesystems are identical due to being run in a container so this shouldn't be any kind of directory overlap issue. Also there is plenty of disk space on both machines and by default Docker does not limit resources available to a container. So what does the SteamCMD error 0x202 really mean and what can I do to fix it?

< >

8개 댓글 중 1-8개 표시

[N]ebsun 2022년 7월 30일 오후 4시 58분

is there any disk usage restriction on the user account that owns / runs the updater?

I remember having the same issue, but can't remember what I did to fix it

jka 2022년 7월 31일 오전 3시 01분

Nebsun님이 먼저 게시:
is there any disk usage restriction on the user account that owns / runs the updater?

I don't think so. And even if there was, then the issue would occur on both of the mentioned machines since in a containerized environment also the user permissions are identical, don't you think?

Metal_Warrior 2022년 8월 1일 오전 8시 46분

Do you add disk space from the host into the container? If yes, that might be your problem.Apart from that the container will probably use a couple of MB on the root file system (I guess /var/lib/docker/), that might cause some trouble too.
Also, most importantly: Docker is useful for stateless containers. Using your container to update something inside it is probably not the most ideal usage of it.

jka 2022년 8월 2일 오후 12시 03분

Metal_Warrior님이 먼저 게시:
Do you add disk space from the host into the container? If yes, that might be your problem.Apart from that the container will probably use a couple of MB on the root file system (I guess /var/lib/docker/), that might cause some trouble too.

I thought of that too, and so I tried both bind mounting a directory from elsewhere in the host filesystem, and just using the Docker area you mentioned (a "regular volume"). No effect on the issue.

Metal_Warrior님이 먼저 게시:
Also, most importantly: Docker is useful for stateless containers. Using your container to update something inside it is probably not the most ideal usage of it.

Containerization is useful for isolation of things. Some would argue that's the main point. Especially when trying out some new tech it's nice to have the environment preconfigured even if you're gonna pull some data in there. Anyway, that's off topic.

Baluka 2023년 11월 11일 오전 8시 11분

I have also found out that this ERROR appears when you forget to unzip the SteamCMD
ZIP-Folder and started SteamCMD while looking in the ZIP-Folder and starting the .exe from there.

So please check that you unzipped SteamCMD ZIP-Folder before using SteamCMD.

MaYeRs 2024년 2월 7일 오전 5시 56분

Baluka님이 먼저 게시:
I have also found out that this ERROR appears when you forget to unzip the SteamCMD
ZIP-Folder and started SteamCMD while looking in the ZIP-Folder and starting the .exe from there.

So please check that you unzipped SteamCMD ZIP-Folder before using SteamCMD.

did you format everything and started from zero ?

Sang 2024년 3월 25일 오전 1시 11분

I encountered the same issue when using the steamcmd/steamcmd docker (Error! App '222860' state is 0x202 after update job.). However, after some time when I checked the logs again, I found that it had actually started downloading (I configure docker to always restart). Maybe after retrying several times, it worked. But this is very strange. I don't understand the meaning of this error.