make sure you have you Logitech gaming software app open http://prntscr.com/go4xi2

- unplug your usb device
- switch the power on and off
- reconnect the usb to the pc
- let the wheel spin
- launch logitech software
- it should spin once more
- restart your game
- done

i go through the same procedure when using my g920

did all this - still no dice.

my firmware is up to date - my logitech software is up to date.

found the issue - steam controller setting - enabling generic controller was checked and apparently got in the way of the wheel communicating to the game. FYI in case anyone else comes across this issue.

Messaggio originale di not_amused:

found the issue - steam controller setting - enabling generic controller was checked and apparently got in the way of the wheel communicating to the game. FYI in case anyone else comes across this issue.

Thanks! That was also my problem. Driven my crazy!

Thank you SO MUCH! That fixed it for me, too :)

is my wheel supposed to be detected as a controller because min isn't any suggestion I've tried everything

Messaggio originale di ofarber7:

is my wheel supposed to be detected as a controller because min isn't any suggestion I've tried everything

Are you using a G29? Do you have the Logitech software installed?

If yes to both of those, try this...

Start with:

Look at Steam -> Settings-> Controller -> General Controller Settings

Untick all the options

Next:

Delete the control settings file in your folder:

Documents\Project CARS 2\savegame\<SteamID>\project cars 2\profiles\default.controllersettings.v103.sav

where SteamID is your Steam ID (just in case you have more than one Steam ID on that machine). After that, start back up Project CARS 2 and see if it detects your G29.

Messaggio originale di not_amused:

found the issue - steam controller setting - enabling generic controller was checked and apparently got in the way of the wheel communicating to the game. FYI in case anyone else comes across this issue.

Thanks that also did the trick for me!

Thanks Mahjik that worked perfect

This fix should work with the 920 as well:
https://www.reddit.com/r/LogitechG/comments/ckulj6/g_hub_not_detecting_wheels_i_figured_out_a/

Excellent help thanks for your help