Hi all,

Quick fixes for yesterday's patch.

Reduces the size of driveshaft junctions, to help with the new angle limitations.
If the limitations still aren't for you, the reimplemented place anywhere cheat will let you disable them.

• Fixed incorrect placement orientation on rotated plate structures.
  
• Fixed inability to pick up blank mantlets.
  
• Fixed Pz38t mantlet trunnions from sticking out of the side of the mantlet.
  
• Fixed crash when returning to the editor after exiting the editor with unattached parts.
  
• Fixed ghost obstructions, which were fixable by reloading the design.
  
• Added snapping for blank mantlets.
  
• Changed the driveshaft-junction connection model to a smaller one.
  
• Shrunk the size of driveshaft junctions by 33%.
  
• Fixed the driveshafts directly connected to the engine and transmission not showing obstruction highlights.
  
• Driveshaft junctions now have a tighter hitbox.
  
• The "Place Anywhere" cheat now functions again, disabling all part placement validation. This will apply to the upcoming crew validation changes.

- Hamish

Hi all,

This patch fully reworks the editor hitbox system, used to detect part selection and obstruction.
Fixes the fundamental bugs and poor performance of the previous system, and cleans things up on my end.

This update is for the experimental branch, you'll need to opt-in to play it:

• Driveshafts connecting to engines and transmissions can no-longer connect at angles greater than 5 degrees.
  
• Cannons now snap to mantlets.
  
• Turret rings can now be selected by selecting the connected turret basket.
  
• Turret rings can now have basket segments lowered to 0 to make basketless turrets.
  
• Driveshaft obstruction hitboxes are now the full length of the shaft, instead of slightly shorter.
  
• Pressing the move hotkey (G) with a crew member selected but no posture node selected will now move the whole crewmember, instead of doing nothing.
  
• Obstruction messages now use correctly formatted part names.
  
• Trunnions are now referred to as "Cannon rotation area" in error messages.
  
• Powertrain selection names are now correctly formatted.

• Fixed not being able to select more than one driveshaft junction at a time.
  
• The cannon breech obstruction area now perfectly matches its visualization.
  
• Fixed armour obstruction hitboxes not perfectly matching their visuals in certain configurations.
  
• Fixed inconsistent part obstructions across maps.
  
• Removed the hull face inside the turret ring for several enemy designs.
  
• Cannon breech obstruction areas are now correct when the breech is in front of the trunnions.
  
• Barrel fuel tanks now have damage models.

• Significantly optimized plate structure edits.
  
• Optimized the hitbox of the cannon breech obstruction area with high elevation and azimuth limits.
  
• Plate structure edits are now multithreaded.
  
• Significantly optimized moving of parts with other parts attached e.g. turrets.

Continuing on with refining 0.2, next update will work on the 0.2 crew system, with the following goals:

• Improve UI for crew role switching
  
• Allow crew members to move to higher-priority roles if the current role-holder is knocked out.
  
• Limit the distance crew members can be from their roles.
  
• Disallow crew members in the turret from performing roles in the hull, and vice versa.
  
• Validate crew member posture, so crew members can't be squeezed into unrealistic positions.

- Hamish