หน้าร้านค้า
Ghostwire: Tokyo
ทั้งหมด กระดานสนทนา ภาพหน้าจอ อาร์ตเวิร์ก ถ่ายทอดสด วิดีโอ ข่าวสาร คู่มือ บทวิจารณ์
Ghostwire: Tokyo > กระดานสนทนาทั่วไป > รายละเอียดกระทู้
DankWestern 5 ก.พ. 2024 @ 3: 14pm
No longer playable on Steam Deck?
Howdy all, I figured I'd get back into this game since it's been ages, and I came to find out that there's nothing I can seem to do on my end to get it running any more. I tried GE-Proton, Proton Hotfix, Proton Experimental, and obviously default settings, and I get this error every time:

lowlevelfatalerror

or

"Sorry, something went wrong. For solutions please visit :
https://support.codefusion.technology/anti-tamper/?e=88500006&|=english"

Which brings me to a webpage that just says

"You can no longer authenticate on new devices

Currently your game purchase cannot be re-validated successfully, please wait 24 hours and try again."

What is going on here?
ผู้สร้างกระทู้นี้ได้ทำเครื่องหมายโพสต์เป็นคำตอบสำหรับคำถามของตน
คลิกที่นี่เพื่อข้ามไปยังโพสต์นั้น
โพสต์ต้นฉบับโดย Capi502:
if you are playing on another device or have played on another device in the past, you need to go back to that device, load your save, and then disable ray tracing if you had it enabled. while you're at it, disable any demanding graphics settings and set qualities to low. start the game and save, then quit, so your save syncs with the cloud.

same goes if you've never played the game before, and are only just starting it on the deck. start the game on another device, change settings, save. go back to Deck, allow the save to sync from cloud.

graphics settings are part of the save file, and deck can't handle the more demanding settings. it's a bad save file design.
< >
กำลังแสดง 1-14 จาก 14 ความเห็น
gamefunner 7 ก.พ. 2024 @ 1: 21pm 
same for me on OLED deck. Launch always crashes before main menu.
#1
DankWestern 7 ก.พ. 2024 @ 1: 25pm 
It's so weird too, on the OG SD, I used to actually prefer playing it on the go, but I guess something screwed up along the way...
#2
Kawai_Cactus 13 ก.พ. 2024 @ 10: 12am 
I bought the game four days ago and had the same problem. I don't know about OLED deck, but on my computer, I found a way to fix it, by changing the DirectX version inside Steam's game's home page. My computer runs with DirectX12 but launching the game with 11 is perfect.
#3
CabinatoArcade 2 มี.ค. 2024 @ 1: 17pm 
Hi,
did anybody found a way to fix this?

I'm also getting the following message when trying to launch the game:

"Sorry, something went wrong. For solutions please visit :
https://support.codefusion.technology/anti-tamper/?e=88500006&|=italian"

Which brings me to a webpage that just says

Currently your game purchase cannot be re-validated successfully, please wait 24 hours
and try again."

I'm on a Deck Oled and I was able to launch the game at first, but after enabling RT (really surprised to see the option! ) the game got constantly stuck on one of the first splash screen and evenctually it stopped launching altogether only showing this error message.
#4
DankWestern 2 มี.ค. 2024 @ 8: 30pm 
I've hit the wall and gave up, thinking about changing my review to negative, but who knows if this sudden random lack of compatibility is something they did, or something Steam did.

As far as the Deck goes, I think we're just SOL unfortunately.
#5
ผู้สร้างกระทู้นี้ได้ระบุว่าโพสต์นี้เป็นคำตอบสำหรับกระทู้ต้นฉบับ
Capi502 4 มี.ค. 2024 @ 3: 59am 
2
if you are playing on another device or have played on another device in the past, you need to go back to that device, load your save, and then disable ray tracing if you had it enabled. while you're at it, disable any demanding graphics settings and set qualities to low. start the game and save, then quit, so your save syncs with the cloud.

same goes if you've never played the game before, and are only just starting it on the deck. start the game on another device, change settings, save. go back to Deck, allow the save to sync from cloud.

graphics settings are part of the save file, and deck can't handle the more demanding settings. it's a bad save file design.
#6
DankWestern 4 มี.ค. 2024 @ 10: 19am 
Ooh, let's give that a shot. I loaded it up on my main rig... set everything to potato... loaded it up on my Deck.... and... IT WORKED!

Thanks, Capi502! This is the solution.
#7
shusbasa 31 มี.ค. 2024 @ 1: 18am 
OMG, thank you very much @capi502 :steamthumbsup:
#8
Potato Child 11 เม.ย. 2024 @ 1: 47pm 
lol, I was having the same issue. I figured the game would automatically configure the settings like most. Guess this one just keeps the same settings from the desktop. Good to know
#9
NoSxGuardian 8 เม.ย. @ 6: 52pm 
Try going to the gear or right click then under launch options type

-dx11

Then launch the game. This worked for me.
#10
cunawarit 9 เม.ย. @ 2: 36am 
It's working absolutely fine for me.
#11
AznSkillz 3 พ.ค. @ 3: 45pm 
u gotta be ♥♥♥♥♥♥ kidding me what a ghetto solution abeit highly annoying
#12
ActedArrow89244 10 มิ.ย. @ 8: 54pm 
What do you do if you don't have access to whatever other device that you've played on?
#13
crater 19 มิ.ย. @ 2: 13pm 
โพสต์ดั้งเดิมโดย ActedArrow89244:
What do you do if you don't have access to whatever other device that you've played on?

You should be able to edit or delete the config file yourself. The default config should be working fine now on Steam Deck, so deleting it may fix it. If not you should be able to edit the config to disable the ray tracing/demanding settings.

The config file should be located at
<SteamLibrary-folder>/steamapps/compatdata/1475810/pfx/Users/deckuser/Saved Games/TangoGameworks/GhostWire Tokyo (STEAM)/Saved/Config/WindowsNoEditor/
แก้ไขล่าสุดโดย crater; 19 มิ.ย. @ 2: 15pm
#14
< >
กำลังแสดง 1-14 จาก 14 ความเห็น
ต่อหน้า: 1530 50

Ghostwire: Tokyo > กระดานสนทนาทั่วไป > รายละเอียดกระทู้
วันที่โพสต์: 5 ก.พ. 2024 @ 3: 14pm
โพสต์: 14

กฎและแนวทางปฏิบัติในกระดานสนทนา