Are you the proud owner of a Vector vehicle? Did you know you can customise it to fit your wishes? This manual will guide you through the process of customising your Vector.

CAUTION:
- You are obviously not allowed to upload a customised Vector to the Workshop.
- If your Vector has been customised, do not save it unless you want to stick with the customisation. Further alterations of the vehicle may interfere with the colours of other parts, so you would end up colouring other parts as well.

https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1295281710
The Vector Apollo has two customisable parts:
- Body colour
- License plates

In order to edit the body colour, select a random yellow-coloured part of your Apollo.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

In order to edit the license plates, select the front and rear license plates. Standard, these plates are fitted with a row of '-'-signs.

Next, type in the numbers and letters for your license plates.

Example
A light gray Apollo.

https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1362272694
The Vector Eos has two customisable parts:
- Body colour
- License plates

In order to edit the body colour, select a random light blue-coloured part of your Eos.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

In order to edit the license plates, select the front and rear license plates. Standard, these plates are fitted with a row of '-'-signs.

Next, type in the numbers and letters for your license plates.

Example
A light green Eos.

https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1269706431
The Vector Ceres has three customisable parts:
- Primary body colour
- Secondary body colour
- License plate

In order to edit the primary body colour, select a random green-coloured part of your Ceres.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

In order to edit the secondary body colour, select a random black-coloured part of your Ceres.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice. Preferably, the secondary colour should be white, light gray, gray, dark gray or black.

In order to edit the license plate, select the rear license plate. Standard, this plate is fitted with a row of '-'-signs.

Next, type in the numbers and letters for your license plate.

Example
A blue Ceres with a gray secondary colour.

https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1242119435
The Vector Colossus has seven customisable parts:
- Primary body colour
- Secondary body colour
- License plates
- Company name
- Company logo
- Destination screen
- Line number

In order to edit the primary body colour, select a random white-coloured part of your Colossus.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

CAUTION: The headlights and reversing lights of your standard Colossus are also white. when changing the primary body colour of your Colossus, please change these back to white. Depending on the colour of your license plate, you will also have to revert this.

The interior lighting will adapt to the primary colour of your Colossus.



In order to edit the secondary body colour, select a random dark blue-coloured part of your Colossus.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

In order to edit the license plates, select the front and rear license plates. Standard, these plates are fitted with a row of '-'-signs.

Next, type in the numbers and letters for your license plate.

In order to edit the company name, select the large signs fitted with '-'-signs on the sides and rear of your Colossus.

Next, type in the company name of your choice. Eventually, you may need to resize the letters.

In order to edit the company logo, select the bricks making up the gray squares on the sides and rear of your Colossus. The company logo is made up of four squares, varying in colour.

Next, colour the four squares of the logo.

In order to edit the destination screen, select the large black screen on the front and rear of your Colossus.

Next, type in the destination of your Colossus.

In order to edit the line number, select the small screen next to the large black screen on the front and rear of your Colossus.

Next, type in the one-digit or two-digit line number of your Colossus.

Example
A gray-dark red Colossus of the 'BRT' (Brick Rigs Transport) public transport company, with the canyon as destination.

http://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1338727917
The Vector Colossus 1900 has six customisable parts:
- Primary body colour
- Secondary body colour
- Curtains
- License plates
- Destination sign
- Line number

In order to edit the primary body colour, select a random white-coloured part of your Colossus.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

CAUTION: Depending on the colour of your license plates, you will have to revert these.

In order to edit the secondary body colour, select a random dark blue-coloured part of your Colossus.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

In order to edit the curtains, position the camera so that you are able to select a curtain in the interior of your Colossus.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

In order to edit the license plates, select the front and rear license plates. Standard, these plates are fitted with a row of '-'-signs.

Next, type in the numbers and letters for your license plate.


In order to edit the destination sign, select the large white sign on the front of your Colossus.

Next, type in the destination of your Colossus. The colour of this sign will adapt to the primary colour of your Colossus.

In order to edit the line number, select the small sign next to the large white sign on the front of your Colossus.

Next, type in the one-digit or two-digit line number of your Colossus.

Example
A grey-dark red Colossus with the Canyon as it's destination.

https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1307097122
The Vector Colossus Vision 2040 has four customisable parts:
- Primary body colour
- Secondary body colour
- Destination screen
- Line number

In order to edit the primary body colour, select a random white-coloured part of your Colossus Vision 2040.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

CAUTION: The reversing lights of your standard Colossus Vision 2040 are also white. when changing the primary body colour of your Colossus Vision 2040, please change these back to white.

Various parts, most notably the glowing parts, will adapt to the primary colour of your Colossus Vision 2040.

In order to edit the secondary body colour, select a random dark blue-coloured part of your Colossus Vision 2040.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

In order to edit the destination screen, select the large glowing screen on the front and rear of your Colossus Vision 2040.

Next, type in the destination of your Colossus Vision 2040.

In order to edit the line number, select the small screen next to the large glowing screen on the front and rear of your Colossus Vision 2040.

Next, type in the one-digit or two-digit line number of your Colossus Vision 2040.

Example
A grey-dark red Colossus Vision 2040.

https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1272733747
The Vector Hermes has three customisable parts:
- The primary body colour
- The secondary body colour
- The rear license plate

In order to edit the primary body colour, select a random gray-coloured part of your Hermes.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

In order to edit the secondary body colour, select a random black-coloured part of your Hermes.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

In order to edit the license plate, select the rear license plate. Standard, this plate is fitted with a row of '-'-signs.

Next, type in the numbers and letters for your license plate.

Example
A black-green Hermes.

https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1355303200
The Vector Kratos has two customisable parts:
- The primary body colour
- The secondary body colour

In order to edit the primary body colour, select a random orange-coloured part of your Kratos.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

In order to edit the secondary body colour, select a random black-coloured part of your Kratos.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

Examples
A dark blue-grey Kratos.

https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1362305246
The Vector Phoenix has three customisable parts:
- Primary body colour
- Secondary body colour
- Fenders

In order to edit the primary body colour, select a random light orange-coloured part of your Phoenix.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

In order to edit the secondary body colour, select a random black-coloured part of your Phoenix.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

The Vector Phoenix comes in two variations: one with and one without fenders. In order to remove the fenders of your Phoenix, select them and delete them.

Example
A dark green-dark grey, fenderless Phoenix.

https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1263823752
The Vector Scorpio has two customisable parts:
- The primary body colour
- The secondary body colour

In order to edit the primary body colour, select a random white-coloured part of your Scorpio.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

CAUTION: The headlights and reversing lights of your standard Scorpio are also white. when changing the primary body colour of your Scorpio, please change these back to white.


In order to edit the secondary body colour, select a random dark orange-coloured part of your Scorpio.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

Example
A yellow-black Scorpio.

https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1299818836
The Vector Vesta has seven customisable parts:
- Primary body colour
- Secondary body colour
- Tertiary body colour
- Quaternary body colour
- License plates
- Interior floors
- Edition

In order to edit the primary body colour, select a random white-coloured part of your Vesta.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

The primary colour will affect the colour of various components too, such as the colour of the pillow, the refrigerator, the rims and the interior lighting in the cockpit as well.

CAUTION: The headlights and reversing lights of your standard Vesta are also white. when changing the primary body colour of your Vesta, please change these back to white. Depending on the colour of your license plates, you will also have to revert these.

In order to edit the secondary body colour, select a random black-coloured part of your Vesta.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice. Preferably, this colour should be a grayscale (but you can select other colours, obviously.)

The secondary colour will affect the colour of the grille, the air intakes and the steering wheel as well.

In order to edit the tertiary body colour, select a random light gray-coloured part of your Vesta.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

The tertiary colour will affect the colour of the side mirrors as well.

In order to edit the quaternary body colour, select a random light blue-coloured part of your Vesta.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

In order to edit the license plates, select the front and rear license plates. Standard, this plates are fitted with a row of '-'-signs.

Next, type in the numbers and letters for your license plate.

In order to edit the interior floors, go inside your Vesta with the camera and select an oak wooden part.

Next, use 'Select same material' in the 'Selection' submenu.
Next, select the material of your choice. Preferably, the interior floor is either a wood type or coloured foam.

The Vector Vesta comes in two editions: the Sports edition and the Luxury edition. This determines the material of the grille, air intakes, ladders and mirrors of your Vesta. The standard Vesta comes in the Sports edition. In order to edit the edition of your Vesta, select the grille, the air intakes, the side mirrors and the ladders of your Vesta.

Next, change the colour to 'no colour'.
Next, change the material to Chrome.

Example
A dark green-white Vesta with a green-light green stripe. Notice how the grille, rims, air intakes and side mirrors adapted to the colours of the Vesta.

https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1260381678
The Vector Zephyr has three customisable parts:
- Body colour
- License plates
- Edition

In order to edit the body colour, select a random dark red-coloured part of your Zephyr.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

In order to edit the license plates, select the front and rear license plates. Standard, these plates are fitted with a row of '-'-signs.

Next, type in the numbers and letters for your license plates.

The Vector Zephyr comes in two editions: the Sports edition and the Luxury edition. This determines the material of the grille, air intakes and door handles of your Zephyr. The standard Zephyr comes in the Sports edition. In order to edit the edition of your Zephyr, select the grille, the air intakes and the door handles of your Zephyr.

Next, change their colour to 'no colour'.
Next, change the material of the selected parts to Chrome.

Example
A dark blue Luxury Zephyr.

https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1359566597
The Vector Zephyr Vision 2040 has one customisable part:
- Body colour

In order to edit the body colour, select a random dark red-coloured part of your Zephyr Vision 2040.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

Example
A dark blue Zephyr Vision 2040.

https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1294196175
The Vector Zeus has two customisable parts:
- Body colour
- License plates

In order to edit the body colour, select a random dark blue-coloured part of your Zeus.

Next, use 'Select same paint' in the 'Selection' submenu.
Next, select a colour of your choice.

In order to edit the license plates, select the front and rear license plates. Standard, these plates are fitted with a row of '-'-signs.

Next, type in the numbers and letters for your license plates.

Example
A black Zeus.

Enjoy your brand new Vector, suited to your needs!